Mon, Aug 01, 2022
This 'How to Mosaic' looks that glass on glass mosaics, the types of materials you can use and what adhesive works best.
Materials
Transparent materials look great when the light is transmitted through them. Transparent glass gems, glass tiles, Millefiori, Glass Pebbles are some options.
Surfaces
Only limited by your imagination but can include vases, bottles and jars. I've used a glass brick which I picked up at Bunning's for about $10, which could look great as a feature in your home. If you are using a glass vase etc you need to take into consideration that you may see the back of your mosaic through the opposing sides.
Adhesives
Clear drying glue such as Weldbond. Make sure the glue will adhere to glass.
Weldbond Glue - When bonding glass tiles to a glass surface, use Weldbond sparingly if you require a crystal-clear bond. Any whiteness indicates the curing process is not complete.
Clear Silicone - Use plenty of clear silicone, pressing down to ensure there are no air bubbles. Note: I found that my silcione dried with clear adhesive lines, not a crystal clear finish.
Preparation
The glass must be completely clean prior to applying any adhesives. Rub the surface down with methylated spirits prior to applying glue.
Tips
This is an example of the adhesive under the green gem glass gem not being cured, Weldbond glue appears white until fully cured.
This is an example for grout under the tesserae, the yellow gem appears brown in spots.
The smaller tesserae worked well in the mosaic.
The beautiful featured glass on glass mosaic has been made by Sue Purnell.
1300 320 392
